Huitai 16# Garnet Polishing Sand Sandblasting Medias
1. Product Introduction
Garnet sand which ground with garnet raw materials, has high hardness, high temperature resistance, stable chemical properties, uniform particles, high grinding efficiency, no scratches and so on. It is suitable for water knife cutting industry; All kinds of metal, plastic, wood and other surface sandblasting industry; Superfine grinding and precision casting for mechanical industry；Grinding for picture tube, optical glass, silicon wafer, etc.
| Chemical analysis |
SiO2 |
Al2O3 |
FeO |
CaO |
MgO2 |
| Wt% |
36-40 |
20-24 |
22-24 |
6-9 |
8-13 |
| Morphology: |
Prismatic, Irregular |
Crystal shape: |
Equiaxed crystal system |
| Color: |
Brownish red |
Melting point: |
1340 ℃ |
| Mohs hardness: |
7.1 |
Density: |
4g/cm³ |
| Number of cycles: |
20 times or more |
Water absorption: |
Non-absorbent |
| Magnetic: |
Weakly magnetic |
Transparency: |
Transparent |
| Dispersion: |
Self-dispersion |
Homogeneity: |
Homogeneous body |
|
Harmful free silicon content:
None
|
Deconstruction:
Irregular deconstruction surface
|
Common particle size(Can be customized according to customer requirements)
| 8# |
16# |
30# |
40# |
60# |
| 2-2.36mm |
1-1.18mm |
500-600μm |
355-425μm |
212-350μm |
| 80# |
100# |
120# |
150# |
180# |
| 150-180μm |
106-125μm |
90-106μm |
63-75μm |
45-63μm |
2. Characteristics
①The texture of garnet sand is hard, with a Mohs hardness of more than 7.1, which is higher than that of commonly used quartz sand, sea sand, river sand and other sandblasting materials, and has a long service life.
②Because garnet is a crystal of an isometric system and has no cleavage, which it is easy to form approximate cube particles with edges and angles after making it into sandblasting, and the effect of sandblasting and rust removal is better. It can not only completely remove the rust, oxide skin, coating and its pollutants on the metal surface, but also because of its high hardness, it can produce an ideal angular rough surface on the cleaned metal surface, increasing the surface area of the metal, improving the adhesion of the interface, and making the binding force of corrosion-resistant protective coating and the metal surface significant. So it can enhance to improve the bonding performance of the coating and the metal surface.
③The density of garnet sand is larger, usually about 4g/cm³, strong impact force, which can better clean the metal surface.
④High strength. Treating the metal surface,garnet sand is not easy to break. Even after it is broken, it will produce new angular, almost cubic particles, so that it can be used repeatedly, usually up to 20 times. It is 20 times of siliceous sand (sea sand or river sand) and more than 2 times of quartz sand (artificial), and its relative cost is low once used.
3. Application
Abrasive: As a high hardness abrasive, it can be used for precision machining of metals, ceramics, glass and other materials.
Cutting tools: It can be used to make cutting tools such as HSS blades and saw blades to improve their service life and cutting efficiency.
Ceramic raw materials: It can be used as ceramic raw materials and glaze additives to improve the physical properties and color of ceramics.
Water treatment: Garnet sand packed in filters can be used to remove suspended particles and impurities from water.
Anti-slip material: Garnet sand mixed with resin and other materials can be made into anti-slip material for floor finishes or walkway surfaces.
Product Tags:
|
|
16# Garnet Abrasive Sand 1mm-1.18mm Red Garnet Blasting Media Images
|
